The charger MS861 has all the functions for the safe and quick charge of the electric cars and plug-in hybrid cars. The charger operates at power mains supply 230V, it’s controlled through Wi-Fi from a smartphone or PC, and it has three battery charge modes.
Voltage, V | 230 |
Mains supply net type | Single-phase |
Max. chargingcurrent, A | 32 |
Porttype | Type1 (J1772) |
Charger cable length, m | 5 |
Simultaneous charge port number, pc. | 1 |
Chargemodenumber | 3 |
Display | available |
Displayed parameters | – operation mode; – charging current; – instantaneous consumed power; – accumulated power. |
Application area | home use |
Charger mounting | wall |
IP | 54 |
Controlmethod | Wi-Fi |
Software update | not available |
The charger MS861 has all the functions for the safe and quick charge of the electric cars and plug-in hybrid cars. The charger operates at power mains supply 230V, it’s controlled through Wi-Fi from a smartphone or PC, and it has three battery charge modes.
The charger MS861 is a multipurpose device, and it’s designed to charge both the electric cars and plug-in hybrid cars equipped by the J1772/Type1 port. The charging unit is meant to operate with single-phase networks, with alternating voltage 230V, with protective ground.
MS861 charges with the current from 6 up to 32 A (can be adjusted with 1A pitch). The charging can be effected at one of three modes:
The device operation is controlled through Wi-Fi from any smartphone or PC. At the same time, any software is not required to be installed.
MS861 is equipped with the following safety features: load control, ground control, leakage control, stuck contactor detection, control of the diode availability in the signal circuits. Prior to every charge set, the charger makes self-test for the safe charging.
Voltage, V | 230 |
Mains supply net type | Single-phase |
Max. chargingcurrent, A | 32 |
Porttype | Type1 (J1772) |
Charger cable length, m | 5 |
Simultaneous charge port number, pc. | 1 |
Chargemodenumber | 3 |
Display | available |
Displayed parameters | – operation mode; – charging current; – instantaneous consumed power; – accumulated power. |
Application area | home use |
Charger mounting | wall |
IP | 54 |
Controlmethod | Wi-Fi |
Software update | not available |
Be the first to write your review!