The charger MS862 is a multipurpose device, and it’s designed to charge both the electric cars and plug-in hybrid cars equipped by the Type2 (Mennekes) port. The charging unit is meant to operate with single-phase networks, with alternating voltage 400V, with protective ground.

MS862 charges with the current from 6 up to 32 A (can be adjusted with 1A pitch). The charging can be effected at one of three modes:

• full charge;
• limited time charge (can be adjusted with 15 minute pitch);
• limited accumulated capacity amount charge (can be adjusted with 1kWh pitch).

The device operation is controlled through Wi-Fi from any smartphone or PC. At the same time, any software is not required to be installed.

MS862 is equipped with the following safety features: load control, ground control, leakage control, stuck contactor detection, control of the diode availability in the signal circuits. Prior to every charge set, the charger makes self-test for the safe charging.