The primary function of a diesel particulate filter is to capture soot resulting from the exhaust gas and not to allow the emission of soot into the atmosphere.
Properly functioning filters capture up to 99% of soot particles accumulating in the filter cells, which is why cleaning is required from time to time. A diesel filter system provides either passive (automatic) or active (operator-assisted) regeneration.
How to recover a loaded filter?
It sometimes happens that the function of automatic regeneration fails to activate when the filter is loaded. It can be caused either by filter control system malfunction or complete clogging of filter cells.
A diesel particulate filter fault may show through:
- decreased gas mileage;
- loss of thrust;
- heavy exhaust smoke.
What is to be done when a DPF problem occurs? There are several solutions to the problem: the filter can either be replaced, or removed (this function in the program must be deleted as well), or it can be cleaned with the use of special equipment.
The first option is quite expensive. The second one is harmful to the environment. The final one - DPF cleaning is the best and most efficient way to recover the unit.
DPF cleaning has the following advantages:
- Exhaust system design and engine settings remain intact.
- No effect on the vehicle, no violation of warranty terms either.
- Exhaust emission complies with the worldwide emission standards.
- The technology is environmentally-friendly.
- The cost of the procedure is low.
The advantages of MS900
To ensure the efficiency and safety of the flushing procedure, it must be performed by a qualified specialist. The procedure requires the use of special equipment.
The number of vehicles equipped with diesel particulate filters is increasingly growing these days. Specialists of MSG Equipment developed DPF Cleaning machine MS900 to satisfy a pressing need for the service. The most innovative engineering solutions for efficient cleaning of particulate filters found their practical application in this machine.
Brief description of MS900:
- Cleaning procedure takes 35-50 minutes for passenger car filters and 50-80 minutes for heavy trucks’.
- Flushing/drying modes can be selected according to the filter type.
- Operation in automatic mode. The operator’s constant presence is not required.
- Can be connected to the main water supply line.
- Temperature of water in the tanks can be adjusted depending on a particular detergent to intensify a chemical reaction and reduce the time of flushing.
- Quick filter drying procedure at t 100 degrees.
- The machine is equipped with protection systems (they block the doors during the machine operation, stop flushing/drying procedures if the door of the operating area is open, signal filter loading)
- Compact size: it occupies 2m² of the floor space, vertical door opening.
- Can be connected to the Internet to provide remote access to the machine operation as well as its customizing.
Find the details, equipment technical characteristics, and highlights on servicems.eu.
Contact our managers for MS900 price and delivery terms.
COMMENTS