MS015 COM is a simple and user-friendly device for quick diagnostics of
automotive alternators (COM (LIN, BSS), SIG, RLO, RVC, C KOR., C JAP., P-D) with
rated voltage of 12V directly in a car.
The tester can be successfully used both in small body shops and big service
stations.
General characteristics | |
Dimensions (L×W×H), mm | 120×65×18 |
Weight, kg | 0,15 |
Supply voltage, V | from 10 V to 18 V |
TFT-LCD touch display, full-colour | Screen size – 2,8" Resolution – 320×240 px |
Operational temperature, ℃ | from 0 to +40 |
Storage temperature, ℃ | from 0 to +40 |
IP rating | IP20 |
Testing of the alternator | |
Connection terminals | «COM» («LIN», «BSS»), «SIG», «RLO», RVC» «C KOR.», «P-D», «C JAP.». |
Tested parameters | - Stabilized voltage; - Protocol type; - Speed of data exchange; - Errors (for COM voltage regulators). |
Nominal voltage of tested alternators, V | 12 |
Protection against polarity reversal | yes |
Short circuit alarm | no |
Battery pack | no |
MS015 COM is a simple and user-friendly device for quick diagnostics of
automotive alternators (COM (LIN, BSS), SIG, RLO, RVC, C KOR., C JAP., P-D) with
rated voltage of 12V directly in a car.
The tester can be successfully used both in small body shops and big service
stations.
Applicability:
The MS015 COM tester assesses the health of voltage regulators of the following types: COM (LIN, BSS), SIG, RLO, RVC, C KOR., C JAP., P-D, with rated voltage of 12V, without dismounting the voltage regulator from the car. The tester is equipped with a simple oscilloscope, which makes it possible to evaluate the overall technical condition of the alternator. It is also possible to check the alternator performance on the test bench that provides its drive.
Advantages:
General characteristics | |
Dimensions (L×W×H), mm | 120×65×18 |
Weight, kg | 0,15 |
Supply voltage, V | from 10 V to 18 V |
TFT-LCD touch display, full-colour | Screen size – 2,8" Resolution – 320×240 px |
Operational temperature, ℃ | from 0 to +40 |
Storage temperature, ℃ | from 0 to +40 |
IP rating | IP20 |
Testing of the alternator | |
Connection terminals | «COM» («LIN», «BSS»), «SIG», «RLO», RVC» «C KOR.», «P-D», «C JAP.». |
Tested parameters | - Stabilized voltage; - Protocol type; - Speed of data exchange; - Errors (for COM voltage regulators). |
Nominal voltage of tested alternators, V | 12 |
Protection against polarity reversal | yes |
Short circuit alarm | no |
Battery pack | no |
Be the first to write your review!