Dimensions (L×W×H), mm | 560х560х445 |
Weight, kg | 50 |
Power source | - electrical network - compressed air |
Supply voltage, V | 100-240 |
Supply type | Single-phase |
Power consumption, W | 60 |
Working pressure of pneumatic line, bar | 6-10 |
Air consumption, l/min | 125 |
Working fluid | DOT3, DOT4 |
Working fluid tank capacity, l | 3.5 |
Working pressure of the bench hydraulic system, bar | 135-150 (limited by bench settings) |
MS301 allows to evaluate the tightness of brake calipers. The bench is equipped with a system of reusable working fluid, which minimizes its consumption. MS301 has low power consumption and air consumption. The bench is equipped with a set of fittings for connecting brake calipers:
• M10x1 connector
• M10x1.25
• Connector M12x1.25
• Adapter WP 5-600-129 (M10x1 in.- M12x1 out.)
• Adapter WP 5-600-230 (M10x1 in.-7/16''20UNF external)
• Adapter WP 5-600-231 (M10x1 in.-3/8''24UNF external)
Advantages:
• Compact benchtop design.
• Reusable working fluid system.
• Cost-effectiveness.
Dimensions (L×W×H), mm | 560х560х445 |
Weight, kg | 50 |
Power source | - electrical network - compressed air |
Supply voltage, V | 100-240 |
Supply type | Single-phase |
Power consumption, W | 60 |
Working pressure of pneumatic line, bar | 6-10 |
Air consumption, l/min | 125 |
Working fluid | DOT3, DOT4 |
Working fluid tank capacity, l | 3.5 |
Working pressure of the bench hydraulic system, bar | 135-150 (limited by bench settings) |